Finding Nemo

16oz UVDTF cup wraps

How to apply UVDTF no heat needed 

1. Clean the Cup
   Make sure your 16 oz cup is smooth, dry, and free of dust, oils, or fingerprints. Use rubbing alcohol and a lint-free cloth for best results.

2. Peel the Backing
   Carefully peel the clear backing sheet away from the design, leaving the wrap attached to the clear transfer film.

3. Position the Design
   Align the wrap on your cup where you want it to go. Once it touches the surface, it will begin to stick—so take your time with placement!

4. Apply the Wrap
   Starting from the center and working outward, press the wrap onto the cup using firm, even pressure. Use a squeegee, credit card, or your fingers to smooth out air bubbles.

5. Peel the Transfer Film
   Slowly and gently peel away the clear transfer film, leaving the design on the cup. Make sure all parts of the design have fully adhered before removing the film.

6. Let It Set
   For best durability, allow the wrap to “cure” for 24 hours before washing or using.

Care Tips:

• Hand wash only

• Not dishwasher or microwave safe

• Avoid soaking or scrubbing the design